Keeping your bike clean is not as easy as it sounds. Most of us failed to realize that cleaning bicycles are critical and very sensitive.
There are different types of cleaning processes that we all thought were right, but it’s not. Some of these mistakes can cause serious damages to your bike.
If you’re not being careful, you might end up ruining its paint and gears, such as GPS or other electrical parts. As a result, your most precious bicycle may not be able to work as it’s supposed to.
Fortunately, there are some ways to avoid damaging your bike every time you clean it. Check out some of these interesting information that will help you understand the dos and don’ts of cleaning a bicycle.
Do Not Flip Bicycle Upside Down
Some bikers often flip their bikes upside down when they are cleaning it, especially since it’s easier to access hard to reach areas that way.
However, flipping bicycles can cause scratches on the seat and other parts as well. Bikes that has GPS or any other computer mounted on the handlebars will also be negatively affected if you flip it upside down.
If you want to thoroughly clean your bicycle, it’s best to do it using its stand or lean it against a wall. But if you insist on flipping it over, make sure to do it over a thick cloth or rug to avoid any scratches.
Always Have a Washing Kit Ready
It is always best to have a bike washing kit ready all the time. Try to stock up on degreaser for the chain and soap. There are pre-formulated soaps that you can buy in the market.
Also, try to get several soft brushers to avoid scratches. Regularly degreasing your chain can avoid rusting, which is one of the most common damages of a bicycle.
When cleaning your bike, make sure to meticulously inspect every part of it. If you see some dirt, wipe it off first with a wet towel. If the wheels have dirt or debris on it, you might want to gently brush it off.
It is also best to bring a bike washing kit like towels, soaps, and water bottles during road trips as you might find yourself driving into dirty and muddy roads.
Do Not Use High-Pressure Spray On Delicate Areas Of Your Bicycle
High-pressure spray is one of the fastest ways of cleaning a bike. It is also used by cars and other vehicles. However, high-pressure spray should be used properly.
Otherwise, it will cause some serious damage on your bike. When using a high-pressure spray, make sure to avoid direct spraying on the suspension, wheels, and crank bearing areas.
If you think you cannot properly use a high-pressure spray on your bike, then you should just use sponges and soap. It is the best way to clean your bike safely.
Do Not Over Lube Or Under Lube The Chain
Lubricating the bike chain is one of the most important parts of cleaning and conditioning. It lessens the chance of getting rust. It also makes your bike smoother and lighter to use.
However, never over lube a bike chain as it will leave black marks everywhere, especially on your legs. You don’t want to drive around cities with a greasy legs or foot.
Make sure to use soft brushes after lubricating the bike chain to remove excess grease. Also, avoid under lubricating the bike chain as it will end up jamming or breaking during your road trip.
One of the best strategies on cleaning the bike chain is to remove its grease first. After degreasing, make sure to properly scrub it with brushes or suds. Before rinsing, keep on polishing it until no more grease can be seen.
After that, you can start applying the lube on the clean chain.
Avoid Dry Washing Your Bike
Many bikers clean their bikes with just a simple dry cloth, which is one of the reasons for damaging the paint of the bike. When cleaning your bike, make sure to prepare a hose or a bunch of water bottles and a bucket of soap-suds, which helps rinse off the muds in the bike.
Make sure to soak the bike properly and wipe it smoothly. You should also avoid using dirty clothes or rags as it will just transfer its dirt into your bike.